RF Receiver + Touch Remote for RGBW LED Tape (480w max) ILRC007 - Integral

Description of ILRC007 - Integral

This is Integral LED part no. ILRC007. If you need to contact us about this product, please quote our product reference of 18532.

The receiver unit is installed between your LED driver (power supply) and the LED Tape. It is supplied with an RGB touch remote control which acts as the transmitter.

This RGBW colour RF (Radio Frequency) receiver and touch remote control can be used with RGBW colour changing strips. With the RGBW colour changing remote control, you can easily change the strip colour by choosing the colour area on the central touch circle or pressing the mode button for 12 colour modes, control the brightness and change the speed when choosing the dynamic light mode. You also can control the 'White' colour chip individually by pressing the 'W' button.

• RF (radio frequency) receiver
• Power input: 12v, 24v DC (from LED driver)
• Maximum output current: 20A (4A x 4 channels)
• Maximum output power with 12v supply: 240 watts (60w per channel)
• Maximum output power with 24v supply: 480 watts (120w per channel)

With the RGB colour changing remote control, you can easily change your strip colour by choosing the colour area on the central touch circle or pressing the mode button for 11 colour modes, control the brightness and change the speed when choosing the dynamic light mode.