Accessories Motion sensors and PIRs PIR Sensor Switch (100-240v, white, 24mm)

PIR Sensor Switch (100-240v, white, 24mm) PIRSENTIM-WH - Leyton Lighting

PIRSENTIM-WH: PIR Sensor Switch, 100-240v, white, 24mm : Leyton Lighting - from £16.51

Description of PIRSENTIM-WH - Leyton Lighting

This is product manufacturers code PIRSENTIM-WH by Leyton Lighting. If you need to contact us about this product, please quote our product reference of 22036.

The PIR Sensor switch will switch on the connected lights when it senses motion. It switches off with an adjustable time delay 10 sec to 3 mins.

  • White sensor head
  • Voltage: 100-240v AC
  • Sensor maximum range: 2.5m
  • Cable length to sensor head: 1.5m (max length 1.5m can not be extended)
  • Input and output mains wiring required
  • Switch body dimensions: 92mm x 20mm x 35mm
  • Sensor cut out diameter: 20mm (depth 17-20mm)
  • Sensor head diameter: 24mm
  • Maximum switched loads:
    • Incandescent lighting and electronic transformers: 250w
    • LED drivers and electronic ballasts: 150w
    • Inductive ballast: 100w

The sensor unit switches mains voltage (100-240v) so if you are switching low voltage lighting such as LEDs then the sensor will be wired before the transformer or LED driver.

Note: The instruction sheet for this product mentions an alternative sensor head with a light sensitive option i.e. only activates in dark conditions. This sensor is not available - the supplied sensor head will work in all ambient lighting conditions.

Buy this product now

£18.57

Quantity pricing

Quantity Price each
1 £18.57
2-3 £18.46
4-9 £18.37
10-99 £18.22
100-199 £16.84
200+ £16.51
(all prices inc. VAT at 20%)

Tell your friends about this

Other variations of this product

pecification

Colour / Finish
White
Manufacturer
Leyton Lighting
Mfr part #
PIRSENTIM-WH

Summary of Leyton Lighting PIRSENTIM-WH

The PIR Sensor detector will switch on the connected 230v lights when it senses the motion of a body. It switches off with an adjustable time delay 10 sec to 3 mins. Detector range up to 2.5m. Input and output wiring required. 1.5m of cable to the sensor head is provided. Driver dimensions: 92mm x 35mm x 20mm Sensor cut out diameter: 20mm (depth 17-20mm)