RF Receiver + Button Remote for RGBW LED Tape (360w max) ILRC010 - Integral

Description of ILRC010 - Integral

This is Integral LED part no. ILRC010. If you need to contact us about this product, please quote our product reference of 18537.

The receiver unit is installed between your LED driver (power supply) and the LED Tape. It is supplied with an RGBW button remote control which acts as the transmitter.

Each receiver can be paired with to up to 10 remote controllers at the same time.

• RF (radio frequency) receiver
• Power input: 12-24v DC (from LED driver)
• Maximum output current: 20A (5A x 4 channels)
• Maximum output power with 12v supply: 240 watts (60w per channel)
• Maximum output power with 24v supply: 480 watts (120w per channel)
• 3 x AAA batteries (not included) are required for remote.

This RGBW colour RF (Radio Frequency) receiver and touch/button remote control can be used with Integral RGBW colour changing strips. With the RGBW colour changing remote control, you can easily change the strip colour by choosing the colour area on the central touch circle or pressing the mode button for 10 colour modes, control the brightness and change the speed when choosing the dynamic light mode. You can also control the RGB chip and White chip individually by pressing the R, G, B and White buttons to create your colour preference. .