RF Receiver + Remote for Colour Temperature Controlled LED Tape ILRC012 - Integral

Description of ILRC012 - Integral

This is Integral LED part no. ILRC012. If you need to contact us about this product, please quote our product reference of 16292.

The receiver unit is installed between your LED driver (power supply) and the LED Tape. It is supplied with a CCT remote control which acts as the transmitter.

Each receiver can be paired with to up to 10 remote controllers at the same time.

• RF (radio frequency) receiver
• Power input: 12-24v DC (from LED driver)
• Maximum output current: 9A (3A x 3 channels)
• Maximum output power with 12v supply: 108 watts (36w per channel)
• Maximum output power with 24v supply: 216 watts (72w per channel)

Note that while the receiver unit supports three output channels, when used with CCT tape only two output channels are used, which limits the maximum wattage of colour controlled LED tape:

• Maximum CCT tape power with 12v supply: 72 watts (36w per channel)
• Maximum CCT tape power with 24v supply: 144 watts (72w per channel)