PIR Sensor Switch (100-240v, white, 24mm) PIRSENTIM-WH - Leyton Lighting

Description of PIRSENTIM-WH - Leyton Lighting

This is product manufacturers code PIRSENTIM-WH by Leyton Lighting. If you need to contact us about this product, please quote our product reference of 22036.

The PIR Sensor switch will switch on the connected lights when it senses motion. It switches off with an adjustable time delay 10 sec to 3 mins.

• White sensor head
• Voltage: 100-240v AC
• Sensor maximum range: 2.5m
• Cable length to sensor head: 1.5m (max length 1.5m can not be extended)
• Input and output mains wiring required
• Switch body dimensions: 92mm x 20mm x 35mm
• Sensor cut out diameter: 20mm (depth 17-20mm)
• Sensor head diameter: 24mm
• Maximum switched loads:
• Incandescent lighting and electronic transformers: 250w
• LED drivers and electronic ballasts: 150w
• Inductive ballast: 100w

The sensor unit switches mains voltage (100-240v) so if you are switching low voltage lighting such as LEDs then the sensor will be wired before the transformer or LED driver.

Note: The instruction sheet for this product mentions an alternative sensor head with a light sensitive option i.e. only activates in dark conditions. This sensor is not available - the supplied sensor head will work in all ambient lighting conditions.