V-Pro Multi-Point PowerGrid Dimmer (GJT100S, steel, 100w max, 1-gang, 1-way) GJT100S - Varilight

Description of GJT100S - Varilight

This is product manufacturers code GJT100S by Varilight. If you need to contact us about this product, please quote our product reference of 23490.

The V-Pro Multi-Point intelligent dimmer series contains the same dimming technology as the regular V-Pro range, but it is controled via touch, or via infra-red remote control. Supplementry dimmers can be added to a master dimmer to provide multiple control locations.

Each master dimmer module will control up to 10 dimmable LED bulbs with a total wattage up to 100w. There is no minimum load requirement.

All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load. V-Pro dimmers are suitable for mains lighting and most dimmable electronic transformers.

• V-Pro intelligent dimming technology
• Tactile touch control
• Soft start feature and intelligent overload protection
• 1-way or multi-way when used with Multi-Point dimming Supplementary Controller unit(s)
• Create your own switch combinations
• Recommended Back Box Depth: 35mm
• Maximum Load Rating: LED; 100W (Max. 10 lamps)
• Maximum Current Rating: 0.7A
• Applicable Safety Standard: BS EN 60669-2-1

Safety advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload.

Intended use: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P).